If your home entertainment device does not respond to the Potenza ST Universal Remote Control after trying all of the
codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a
code for your TV:
- Turn on your TV.
- On the remote control, press
TV once; it will blink once. Then press and hold SETUP until the
TV key blinks twice.
- Type 9 9 1. The
TV key will blink twice.
- Press and release the key continuously, then stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device,
starting with the most popular code first.
POWER . The TV should turn on, then press SETUP once to lock in the code. The LED will blink twice to indicate that the code is saved.
NOTE: If the TV does not turn on during step 6, then slowly press and release to go back through
the codes, then press SETUP when the TV turns on.
To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g.,
STB) for the device you are searching for.